Project

General

Profile

Building information

Release tarballs as well as snapshots are available:

OpenWRT installation from routing feed

Alfred is also part of the routing feed of OpenWRT. For newer OpenWRT, just use:

1. Install the alfred package:

./scripts/feeds install alfred

3. Run "make menuconfig" and select alfred (available under "Network --->")

OpenWRT development feed

There is also a development packet feed for OpenWRT available for alfred:

1. add the alfred feed by adding the following line into your feeds.conf:

src-git batman git://git.open-mesh.org/openwrt-feed-devel.git

2. Update and install the feed:

./scripts/feeds update
./scripts/feeds install alfred

3. Run "make menuconfig" and select alfred (available under "Network --->")

Finally, re-build Openwrt and enjoy using alfred! :)