Project

General

Profile

Tweaking B.A.T.M.A.N. Advanced

This document aims to provide a high level overview about the individual settings batman-adv allows you to make, in order to tweak its behaviour. If you are trying to find out what these various batctl options are good for, this is the right document for you. Some of the features require extended explanation & examples which is not the scope of this document. Links to complementary documents will be provided if available.

Interface handling

To better understand the background of the new interface configuration concept (as of batman-adv 2010.0.0), it is helpful to see in which direction batman-adv is heading: Until now, batman aggregated all configured interface into a single mesh cloud (manifested in a single bat0 interface). As of 2010.2.0 it is possible to let a single mesh node participate in mutliple mesh clouds at the same time which makes it necessary to assign interfaces to individual mesh clouds and having multiple batX interfaces.

To activate a given supported interface on a mesh cloud simply add it via batctl to an mesh interface. You can freely choose the mesh interface name but for the sake of simplicity we continue to use "bat0". Unsupported interface are for example. loopback, non-ethernet and batman's own interfaces

batctl meshif bat0 if add eth0

Repeat this step for all interfaces you wish to add. All interfaces using the same mesh cloud interface belong into the same mesh cloud. Now batman-adv starts using/broadcasting on this/these interface(s).

To deactivate an interface you have to use batctl again:

batctl meshif bat0 if del eth0

ELP interval

Available since: batman-adv 2016.1

Defines the interval in milliseconds in which B.A.T.M.A.N. V emits probing packets for neighbor sensing (ELP). The more packets are sent the faster ELP / B.A.T.M.A.N. V detects a new neighbor or link failure at the cost of overhead. B.A.T.M.A.N. IV ignores the setting entirely.

batctl hardif eth0 elp_interval
500

Throughput override

Available since: batman-adv 2016.1

Defines the throughput value to be used by B.A.T.M.A.N. V when estimating the link throughput for all neighbors connected to this interface. If the value is set to 0 then batman-adv will try to estimate the throughput by itself by either querying the WiFi driver or the Ethernet interface. B.A.T.M.A.N. IV ignores the setting entirely.

batctl hardif eth0 throughput_override
0.0 MBit

Mesh cloud handling

After having added interfaces to a mesh cloud, batman-adv automatically creates the appropriate batX mesh interface(s). Each of those mesh interfaces can be configured via batctl, e.g.

        aggregation|ag             [0|1]                display or modify aggregation setting
        ap_isolation|ap            [0|1]                display or modify ap_isolation setting
        bonding|b                  [0|1]                display or modify bonding setting
        bridge_loop_avoidance|bl   [0|1]                display or modify bridge_loop_avoidance setting
        distributed_arp_table|dat  [0|1]                display or modify distributed_arp_table setting
        fragmentation|f            [0|1]                display or modify fragmentation setting
        gw_mode|gw                 [mode]               display or modify the gateway mode
        hop_penalty|hp             [penalty]            display or modify hop_penalty setting
        isolation_mark|mark        [mark]               display or modify isolation_mark setting
        loglevel|ll                [level]              display or modify the log level
        multicast_forceflood|mff   [0|1]                display or modify multicast_forceflood setting
        network_coding|nc          [0|1]                display or modify network_coding setting
        orig_interval|it           [interval]           display or modify orig_interval setting

aggregate originator messages

Available since: batman-adv 2010.0.0

In order to reduce the protocol overhead created to find all the participants in the network, batman has the ability to collect & aggregate these protocol messages (called originator messages or ogm) and sending them in a single packet instead of several small packets. This feature is enabled by default, since it is helpful in most cases. If you intend to run batman-adv in a highly mobile environment (for example cars) you might want to turn it off as it introduces a (normally negligible) network update delay.

batctl meshif bat0 aggregation
enabled

ap isolation

Available since: batman-adv 2011.4.0

Standard WiFi AccessPoints support a feature known as 'AP isolation' which prevents one connected wireless client to talk to another wireless client. In most situations this is considered a security feature. If the WiFi AP interface is bridged into a batman-adv mesh network it might be desirable to extend this wireless client isolation throughout the mesh network, therefore batman-adv has the ability to do just that (turned off by default). This setting only affects packets without any VLAN tag (untagged packets). The ap isolation setting for VLAN tagged packets is modifiable through the per-VLAN settings.

batctl meshif bat0 ap_isolation
disabled

bonding mode

Available since: batman-adv 2010.1.0

When running the mesh over multiple WiFi interfaces per node batman-adv is capable of optimizing the traffic flow to gain maximum performance. Per default it operates in the "interface alternating" mode (which is suitable for most situations) that switches the WiFi interface with each hop to avoid store & forward. Alternatively, batman-adv can be switched into "bonding mode" in which batman-adv is using all interfaces at the same time to send & receive data. However, this mode is only recommended in special one-hop cases. You can read about our alternatebonding test results to see what suits you best.

batctl meshif bat0 bonding
disabled

bridge loop avoidance

Available since: batman-adv 2012.2.0 (if bridge loop avoidance has been compiled-in)

In bridged LAN setups it is advisable to enable the bridge loop avoidance in order to avoid broadcast loops that can bring the entire LAN to a standstill. The bridge loop avoidance page explains the bridge loop problematic in greater detail as well as the batman-adv approach to address it.
It is necessary to activate the bridge loop avoidance at compile time before you can use this feature (consult the README.external file to learn how to set the compile option).

batctl meshif bat0 bridge_loop_avoidance
disabled

distributed ARP table

Available since: batman-adv 2013.0.0

When enabled the distributed ARP table forms a mesh-wide ARP cache that helps non-mesh clients to get ARP responses much more reliably and without much delay. A comprehensive documentation has been made available in our wiki. One document focuses on the general DAT concept whereas the second document is about the technical details & implementation specifics.
It is necessary to activate the distributed ARP table at compile time before you can use this feature (consult the README.external file to learn how to set the compile option).

batctl meshif bat0 distributed_arp_table
enabled

fragmentation

Available since: batman-adv 2010.2.0

Batman-adv has a built-in layer 2 fragmentation for unicast data flowing through the mesh which will allow to run batman-adv over interfaces / connections that don't allow to increase the MTU beyond the standard Ethernet packet size of 1500 bytes. When the fragmentation is enabled batman-adv will automatically fragment over-sized packets and defragment them on the other end. Per default fragmentation is enabled and inactive if the packet fits but it is possible to deactivate the fragmentation entirely.

Note: Although the fragmentation is rather handy it comes with a severe performance penalty (as every fragmentation does), therefore it should be avoided to make use of this feature whenever possible.

batctl meshif bat0 fragmentation
enabled

gateway bandwidth and mode

Available since: batman-adv 2011.0.0

The internet gateway support allows each gateway to also announce its available internet bandwidth. Clients looking for the most suitable gateway to connect to receive this bandwidth announcement and can make use of it while choosing their gateway. Per default a bandwidth of 10.0/2.0 MBit is assumed. Details regarding the syntax of the bandwidth setting can be found in the batctl manpage.

batctl meshif bat0 gw_mode
server (announced bw: 10.0/2.0 MBit)

A batman-adv node can either run in server mode (sharing its internet connection with the mesh) or in client mode (searching for the most suitable internet connection in the mesh) or having the gateway support turned off entirely (which is the default setting). Gateways can tweak the announced internet bandwidth whereas clients can configure the manner in which batman-adv chooses its gateway.

If multiple batman-adv gateways are available a batman-adv client node selects its best gateway based on certain criteria such as link quality / announced bandwidth / etc. The selection algorithm can be modified to best serve the requirements. The gateway selection class of '20' is the default value. All available gateway selection classes are thoroughly explained in the batctl manpage.

Note: Please read the internet gateway documentation to understand its interaction with DHCP.

# switch to server and announce 10Mbit/s download + 2Mbit/s upload
batctl meshif bat0 gw_mode server 10Mbit/2Mbit

# switch to client and and use selection class 20
batctl meshif bat0 gw_mode client 20

# turn off gateway mode
batctl meshif bat0 gw_mode off

hop penalty

Available since: batman-adv 2011.0.0

The hop penalty setting allows to modify batman-adv's preference for multihop routes vs. short routes. The value is applied to the TQ of each forwarded OGM, thereby propagating the cost of an extra hop (the packet has to be received and retransmitted which costs airtime). A higher hop penalty will make it more unlikely that other nodes will choose this node as intermediate hop towards any given destination. On the hand, a lower hop penalty will result in longer routes because retransmissions are not penalized.

Since 2014.1.0, the hop penalty is applied in a slightly different way: it is applied once for OGMs leaving on a different interfaces it has been received, and applied twice if its leaving on the same interface if that is a WiFi interface. This is done to penalize half-duplex routes, and prefer routes with changing interfaces if there is a path with similar quality available. The default hop penalty of '15' is a reasonable value for most setups and probably does not need to be changed. However, mobile nodes could choose a value of 255 (maximum value) to avoid being chosen as a router by other nodes.

batctl meshif bat0 hop_penalty
30

isolation mark

Available since: batman-adv 2014.1.0

The isolation mark is an extension to the 'ap isolation' that allows the user to decide which client has to be classified as isolated by means of firewall rules, thus increasing the flexibility of the AP isolation feature. batman-adv extracts the fwmark that the firewall attached to each packet it receives through the soft-interface and decides based on this value if the source client has to be considered as isolated or not. The isolation mark needs to be configured in batman-adv in the form 'value/mask'. Configuration and application details can be found on the extended ap isolation page.

batctl meshif bat0 isolation_mark
0x00000000/0x00000000

log level

Available since: batman-adv 2010.1.0

The standard warning and error messages which help to setup & operate batman-adv are sent to the kernel log. However, batman-adv also offers extended logs that can be used to understand and/or debug the routing protocol. Keep in mind that it is necessary to activate debugging at compile time before you can use these facilities (consult the README.external file to learn how to set the compile option). Per default, the logging is deactivated (log level: 0).

batctl meshif bat0 loglevel
[x] all debug output disabled (none)
[ ] messages related to routing / flooding / broadcasting (batman)
[ ] messages related to route added / changed / deleted (routes)
[ ] messages related to translation table operations (tt)
[ ] messages related to bridge loop avoidance (bla)
[ ] messages related to arp snooping and distributed arp table (dat)
[ ] messages related to network coding (nc)
[ ] messages related to multicast (mcast)
[ ] messages related to throughput meter (tp)

multicast mode

Available since: batman-adv 2014.2.0

Enables more efficient, group aware multicast forwarding infrastructure in batman-adv. Aiming to reduce unnecessary packet transmissions, this optimization announces multicast listeners via the translation table mechanism, thereby signaling interest in certain multicast traffic. Based on this information, batman-adv can make a decision how to forward the traffic with the least negative impact on the network. If disabled multicast traffic is forwarded to the every node in the network (broadcast).
The multicast optimization documentation provides an excellent starting point to learn about the general ideas of these optimizations.

batctl meshif bat0 multicast_mode
enabled

network coding

Available since: batman-adv 2013.2.0

When enabled network coding increases the WiFi throughput by combining multiple frames into a single frame, thus reducing the needed air time. A comprehensive documentation has been made available in our wiki. One document focuses on the general network coding concept whereas the second document is about the technical details & implementation specifics. Our download section also contains recorded network coding talks.
It is necessary to activate network coding at compile time before you can use this feature (consult the README.external file to learn how to set the compile option).

batctl meshif bat0 network_coding
enabled

originator interval

Available since: batman-adv 2010.0.0

The value specifies the interval (milliseconds) in which batman-adv floods the network with its protocol information. The default value of one message per second allows batman to recognize a route change (in its near neighborhood) within a timeframe of maximal one minute (most likely much sooner). In a very static environment (batman nodes are not moving, rare ups & downs of nodes) you might want to increase the value to save bandwidth. On the other hand, it might prove helpful to decrease the value in a highly mobile environment (e.g. the aforementioned cars) but keep in mind that this will drastically increase the traffic. Unless you experience problems with your setup, it is suggested you keep the default value.

batctl meshif bat0 orig_interval
1000

routing algorithm

Available since: batman-adv 2012.1.0

Retrieve the configured routing algorithm of the bat0 interface:

batctl ra
BATMAN_IV

Note: The routing algorithm configuration has an effect upon creation of a new batX interface only. The newly created mesh cloud uses the the routing algorithm configured at this point. It is not possible to change the routing algorithm of an already existing batX interface.

To allow changing the routing algorithm even before a batX interface was created this configuration option was implemented as a module parameter. Modifying it's configuration is as easy as every other configuration option:

batctl ra BATMAN_IV

How to retrieve the list of available routing algorithms is explained on this page.

VLAN handling

The batX mesh interface created by batman-adv also supports VLANs which enables the administrator to configure virtual networks with independent settings on top of a single mesh cloud. It might be desirable to run the different VLANs with different batman-adv settings. Therefore, batman-adv offers per-VLAN settings since batman-adv 2014.0.0.

For example, after adding VLAN 0 and VLAN 1 on top of bat0, the commands can be accessed via the vlan id:

# vlan 1
batctl meshif bat0 vid 1 ap_isolation
disabled

# vlan 0
batctl meshif bat0 vid 0 ap_isolation
disabled

or vlan name

# vlan 1
batctl vlan bat0.1 ap_isolation
disabled

# vlan 0
batctl vlan bat0.0 ap_isolation
disabled

ap isolation

Available since: batman-adv 2014.0.0

Standard WiFi AccessPoints support a feature known as 'AP isolation' which prevents one connected wireless client to talk to another wireless client. In most situations this is considered a security feature. If the WiFi AP interface is bridged into a batman-adv mesh network it might be desirable to extend this wireless client isolation throughout the mesh network, therefore batman-adv has the ability to do just that (disabled by default).

batctl meshif bat0 vid 1 ap_isolation
disabled

Hard/slave interface handling

The B.A.T.M.A.N. V routing algorithm also uses settings for the enslaved interfaces. For example, after adding eth0 and wlan as interface to bat0, the commands can be accessed via the hardif name:

# eth0
batctl hardif eth0 elp_interval
disabled

# eth1
batctl meshif bat0 hardif eth1 elp_interval
disabled

elp_interval

Available since: batman-adv 2019.3

Defines the interval in milliseconds in which batman-adv emits probing packets for neighbor sensing (ELP) in B.A.T.M.A.N. V.

batctl hardif eth0 elp_interval
disabled

throughput_override

Available since: batman-adv 2019.3

Defines the throughput value to be used by B.A.T.M.A.N. V when estimating the link throughput using this interface. If the value is set to 0 then batman-adv will try to retrieve the expected throughput from the hardif (driver).

batctl hardif eth0 throughput_override
0