Project

General

Profile

Bug #368

batctl transglobal -u/-m not working with 2018.4

Added by Andreas Ziegler 9 days ago. Updated 8 days ago.

Status:
Resolved
Priority:
Normal
Assignee:
batman-adv developers
Target version:
Start date:
12/06/2018
Due date:
% Done:

0%


Description

after updating to batctl 2018.4 i cannot use the -u and -m parameter of batctl transglobal anymore
with 2018.3 those are working fine

output:

# batctl transglobal -u
Error - unrecognised option '-u'
Usage: batctl [options] transglobal|tg [parameters]
parameters:
      -h print this help
      -n don't replace mac addresses with bat-host names
      -H don't show the header
      -w [interval] watch mode - refresh the table continuously
      -u print unicast mac addresses only
      -m print multicast mac addresses only

# batctl transglobal -m
Error - unrecognised option '-m'
Usage: batctl [options] transglobal|tg [parameters]
parameters:
      -h print this help
      -n don't replace mac addresses with bat-host names
      -H don't show the header
      -w [interval] watch mode - refresh the table continuously
      -u print unicast mac addresses only
      -m print multicast mac addresses only

History

#1 Updated by Sven Eckelmann 9 days ago

  • Target version set to 2019.0
  • Status changed from New to In Progress

#2 Updated by Sven Eckelmann 9 days ago

  • Target version deleted (2019.0)
  • Project changed from batman-adv to batctl

#3 Updated by Sven Eckelmann 9 days ago

  • Target version set to 2019.0

#4 Updated by Andreas Ziegler 8 days ago

thank you, build and run tested on Debian Jessie and Stretch, working.

#5 Updated by Sven Eckelmann 8 days ago

  • Status changed from In Progress to Resolved

Queued up for 2019.0

Also available in: Atom PDF