U-Boot SPL 2015.01 (Mar 18 2016 - 19:30:08) DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 U-Boot 2015.01 (Mar 18 2016 - 19:30:08) Allwinner Technology CPU: Allwinner A20 (SUN7I) I2C: ready DRAM: 1016 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment Reserved 8192kB of RAM for Framebuffer. In: serial Out: serial Err: serial SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: dwmac.1c50000 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0... Found U-Boot script /boot.scr reading /boot.scr 377 bytes read in 18 ms (19.5 KiB/s) ## Executing script at 43100000 reading uImage 1981560 bytes read in 117 ms (16.2 MiB/s) reading dtb 23549 bytes read in 30 ms (765.6 KiB/s) ## Booting kernel from Legacy Image at 42000000 ... Image Name: ARM OpenWrt Linux-3.18.27 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1981496 Bytes = 1.9 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Kernel Image ... OK Using Device Tree in place at 43000000, end 43008bfc Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.27 (julian@eclipse) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48900) ) #1 SMP PREEMPT Fri Mar 18 19:27:10 CET 2016 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: LeMaker Banana Pi [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] PERCPU: Embedded 9 pages/cpu @eefe1000 s6272 r8192 d22400 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258576 [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1025188K/1040384K available (3931K kernel code, 174K rwdata, 1132K rodata, 208K init, 610K bss, 15196K reserved, 262144K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc04f9ef4 (5064 kB) [ 0.000000] .init : 0xc04fa000 - 0xc052e000 ( 208 kB) [ 0.000000] .data : 0xc052e000 - 0xc05598f8 ( 175 kB) [ 0.000000] .bss : 0xc05598f8 - 0xc05f214c ( 611 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000023] Switching to timer-based delay loop, resolution 41ns [ 0.000357] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000514] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns [ 0.000685] Console: colour dummy device 80x30 [ 0.000721] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000738] pid_max: default: 32768 minimum: 301 [ 0.000848] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000860] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001489] CPU: Testing write buffer coherency: ok [ 0.001805] /cpus/cpu@0 missing clock-frequency property [ 0.001823] /cpus/cpu@1 missing clock-frequency property [ 0.001838] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001893] Setting up static identity map for 0x40011c40 - 0x40011c74 [ 0.060450] CPU1: Booted secondary processor [ 0.060493] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.060563] Brought up 2 CPUs [ 0.060588] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.060594] CPU: All CPU(s) started in HYP mode. [ 0.060599] CPU: Virtualization extensions available. [ 0.065075] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.065484] pinctrl core: initialized pinctrl subsystem [ 0.065886] regulator-dummy: no parameters [ 0.071994] NET: Registered protocol family 16 [ 0.072348] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.111521] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.111557] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral [ 0.111587] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.111602] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral [ 0.111818] vcc3v0: 3000 mV [ 0.112043] vcc3v3: 3300 mV [ 0.112293] vcc5v0: 5000 mV [ 0.112380] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe [ 0.112398] platform gmac-3v3: Driver reg-fixed-voltage requests probe deferral [ 0.112849] SCSI subsystem initialized [ 0.113247] usbcore: registered new interface driver usbfs [ 0.113318] usbcore: registered new interface driver hub [ 0.113433] usbcore: registered new device driver usb [ 0.113589] Linux video capture interface: v2.00 [ 0.113668] pps_core: LinuxPPS API ver. 1 registered [ 0.113676] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.113706] PTP clock support registered [ 0.114774] Switched to clocksource arch_sys_counter [ 0.121905] NET: Registered protocol family 2 [ 0.122974] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.123059] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.123181] TCP: Hash tables configured (established 8192 bind 8192) [ 0.123265] TCP: reno registered [ 0.123280] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.123339] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.123623] NET: Registered protocol family 1 [ 0.125165] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.125321] audit: initializing netlink subsys (disabled) [ 0.125405] audit: type=2000 audit(0.110:1): initialized [ 0.134298] VFS: Disk quotas dquot_6.5.2 [ 0.134558] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.136331] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.136356] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.137079] msgmni has been set to 1490 [ 0.138111] bounce: pool size: 64 pages [ 0.138136] io scheduler noop registered [ 0.138151] io scheduler deadline registered [ 0.138208] io scheduler cfq registered (default) [ 0.138525] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral [ 0.141203] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.183606] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.187333] console [ttyS0] disabled [ 0.207747] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.814490] console [ttyS0] enabled [ 0.840993] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 36, base_baud = 1500000) is a U6_16550A [ 0.872949] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 52, base_baud = 1500000) is a U6_16550A [ 0.885470] platform 1c50000.ethernet: Driver stmmaceth requests probe deferral [ 0.892897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.899467] ehci-platform: EHCI generic platform driver [ 0.904865] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 0.912159] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 0.919494] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.925722] ohci-platform: OHCI generic platform driver [ 0.931062] platform 1c14400.usb: Driver ohci-platform requests probe deferral [ 0.938376] platform 1c1c400.usb: Driver ohci-platform requests probe deferral [ 0.945755] usbcore: registered new interface driver usb-storage [ 0.952007] mousedev: PS/2 mouse device common for all mice [ 0.962268] axp20x-regulator axp20x-regulator: regulators node not found [ 0.969149] LDO1: 1300 mV [ 0.972298] LDO2: at 3000 mV [ 0.975698] LDO3: at 2275 mV [ 0.978851] LDO4: at 2800 mV [ 0.982215] LDO5: at 2800 mV [ 0.985637] DCDC2: at 1400 mV [ 0.989106] DCDC3: at 1250 mV [ 0.992241] axp20x 0-0034: AXP20X driver loaded [ 0.997829] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.006405] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.012342] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.055002] sunxi-mmc 1c0f000.mmc: base:0xf00f6000 irq:64 [ 1.062779] sunxi-ss 1c15000.crypto-engine: Die ID 0 [ 1.067830] sunxi-ss: probe of 1c15000.crypto-engine failed with error -22 [ 1.075493] TCP: cubic registered [ 1.078832] Initializing XFRM netlink socket [ 1.083141] NET: Registered protocol family 17 [ 1.087766] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.100440] Bridge firewalling registered [ 1.104463] 8021q: 802.1Q VLAN Support v1.8 [ 1.108796] Registering SWP/SWPB emulation handler [ 1.114102] registered taskstats version 1 [ 1.119083] usb1-vbus: 5000 mV [ 1.122663] usb2-vbus: 5000 mV [ 1.127319] gmac-3v3: 3300 mV [ 1.174166] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.184852] stmmaceth 1c50000.ethernet: no reset control found [ 1.191255] Ring mode enabled [ 1.194309] No HW DMA feature register supported [ 1.198870] Normal descriptors [ 1.198899] mmc0: new high speed SDHC card at address e624 [ 1.207713] TX Checksum insertion supported [ 1.213392] mmcblk0: mmc0:e624 SD08G 7.40 GiB [ 1.216616] libphy: stmmac: probed [ 1.216626] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 1.216631] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) [ 1.217010] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.217045] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.217169] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.234814] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.235016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.235024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.235029] usb usb1: Product: EHCI Host Controller [ 1.235035] usb usb1: Manufacturer: Linux 3.18.27 ehci_hcd [ 1.235040] usb usb1: SerialNumber: 1c14000.usb [ 1.235628] hub 1-0:1.0: USB hub found [ 1.235668] hub 1-0:1.0: 1 port detected [ 1.236331] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.236383] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.236487] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.254865] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.255051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.255058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.255064] usb usb2: Product: EHCI Host Controller [ 1.255069] usb usb2: Manufacturer: Linux 3.18.27 ehci_hcd [ 1.255074] usb usb2: SerialNumber: 1c1c000.usb [ 1.255627] hub 2-0:1.0: USB hub found [ 1.255662] hub 2-0:1.0: 1 port detected [ 1.256308] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.256341] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.256492] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.318952] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.318960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.318966] usb usb3: Product: Generic Platform OHCI controller [ 1.318971] usb usb3: Manufacturer: Linux 3.18.27 ohci_hcd [ 1.318976] usb usb3: SerialNumber: 1c14400.usb [ 1.319502] hub 3-0:1.0: USB hub found [ 1.319538] hub 3-0:1.0: 1 port detected [ 1.320151] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.320183] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.320303] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.378951] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.378959] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.378964] usb usb4: Product: Generic Platform OHCI controller [ 1.378970] usb usb4: Manufacturer: Linux 3.18.27 ohci_hcd [ 1.378975] usb usb4: SerialNumber: 1c1c400.usb [ 1.379522] hub 4-0:1.0: USB hub found [ 1.379559] hub 4-0:1.0: 1 port detected [ 1.379962] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.384644] vcc5v0: disabling [ 1.384652] vcc3v0: disabling [ 1.488763] mmcblk0: p1 p2 [ 1.494548] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.503485] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.516897] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 1.524433] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.531491] Freeing unused kernel memory: 208K (c04fa000 - c052e000) [ 1.640749] init: Console is alive [ 1.644465] init: - watchdog - [ 2.648475] init: - preinit - Detected bananapi // LeMaker Banana Pi [ 2.731365] random: mktemp urandom read with 4 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 5.796138] mount_root: mounting /dev/root [ 5.800858] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 5.811354] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 5.837847] procd: - early - [ 5.840865] procd: - watchdog - [ 6.606054] procd: - ubus - [ 7.609696] procd: - init - Please press Enter to activate this console. [ 8.232866] NET: Registered protocol family 10 [ 8.242967] tun: Universal TUN/TAP device driver, 1.6 [ 8.248889] tun: (C) 1999-2004 Max Krasnyansky [ 8.259186] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.277084] batman_adv: B.A.T.M.A.N. advanced 2016.0 (compatibility version 15) loaded [ 8.297752] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 8.305320] sunxi-rtc 1c20d00.rtc: RTC enabled [ 8.318817] u32 classifier [ 8.321545] input device check on [ 8.325896] Actions configured [ 8.330868] Mirror/redirect action on [ 8.380954] Ebtables v2.0 registered [ 8.386278] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.400730] nf_conntrack version 0.5.0 (16021 buckets, 64084 max) [ 8.513019] xt_time: kernel timezone is -0000 [ 11.937749] RX IPC Checksum Offload disabled [ 11.952824] No MAC Management Counters available [ 11.969175] device eth0.3 entered promiscuous mode [ 11.974031] device eth0 entered promiscuous mode [ 11.982173] br-client: port 1(eth0.3) entered forwarding state [ 11.988168] br-client: port 1(eth0.3) entered forwarding state [ 12.032478] device eth0.2 entered promiscuous mode [ 12.049870] br-wan: port 1(eth0.2) entered forwarding state [ 12.055544] br-wan: port 1(eth0.2) entered forwarding state [ 12.096467] device br-client entered promiscuous mode [ 12.319653] batman_adv: bat0: Adding interface: eth0.102 [ 12.342191] batman_adv: bat0: Interface activated: eth0.102 [ 12.368829] batman_adv: bat0: Adding interface: eth0.100 [ 12.370226] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 12.408061] batman_adv: bat0: Interface activated: eth0.100 [ 12.423195] batman_adv: bat0: Adding interface: eth0.101 [ 12.427478] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 12.437005] batman_adv: bat0: Interface activated: eth0.101 [ 12.450289] 8021q: adding VLAN 0 to HW filter on device bat0 [ 12.457783] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 12.476966] device bat0 entered promiscuous mode [ 12.481729] br-client: port 2(bat0) entered forwarding state [ 12.487551] br-client: port 2(bat0) entered forwarding state [ 13.092033] batman_adv: bat0: Changing gw mode from: off to: client [ 13.098739] batman_adv: bat0: gw_sel_class: Changing from: 20 to: 15 [ 13.105651] batman_adv: bat0: hop_penalty: Changing from: 30 to: 15 [ 13.112197] batman_adv: bat0: multicast_mode: Changing from: enabled to: disabled [ 13.121181] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000 [ 13.480576] batman_adv: bat0: Adding interface: mesh-vpn [ 13.487555] batman_adv: bat0: The MTU of interface mesh-vpn is too small (1406) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which. [ 13.516518] batman_adv: bat0: Interface activated: mesh-vpn [ 13.525152] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 13.932260] br-wan: port 1(eth0.2) entered disabled state [ 13.939085] br-client: port 1(eth0.3) entered disabled state [ 13.987370] batman_adv: bat0: Interface deactivated: eth0.100 [ 13.993137] batman_adv: bat0: Removing interface: eth0.100 [ 14.004625] batman_adv: bat0: Interface deactivated: eth0.102 [ 14.010903] batman_adv: bat0: Removing interface: eth0.102 [ 14.018061] batman_adv: bat0: Interface deactivated: eth0.101 [ 14.023825] batman_adv: bat0: Removing interface: eth0.101 [ 14.030058] tried to remove device eth0 from local-node [ 14.035444] ------------[ cut here ]------------ [ 14.040092] kernel BUG at net/core/dev.c:4981! [ 14.044542] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 14.050368] Modules linked in: iptable_nat nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute xt_time xt_tcpudp xt_state xt_quota s [ 14.147741] CPU: 1 PID: 1658 Comm: batadv.sh Not tainted 3.18.27 #1 [ 14.154004] task: ee8ab740 ti: edc20000 task.ti: edc20000 [ 14.159406] PC is at __netdev_adjacent_dev_remove+0x64/0x124 [ 14.165076] LR is at 0x0 [ 14.167609] pc : [] lr : [<00000000>] psr: 60000113 [ 14.167609] sp : edc21e18 ip : 00000000 fp : edc21e34 [ 14.179070] r10: edc57500 r9 : ee3fd800 r8 : ee3fd868 [ 14.184289] r7 : eebd8000 r6 : edc0d000 r5 : eebd8060 r4 : eebd8054 [ 14.190809] r3 : 00000000 r2 : 00000001 r1 : eefea24c r0 : 0000002b [ 14.197329] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 14.204455] Control: 10c5387d Table: 6de9806a DAC: 00000015 [ 14.210194] Process batadv.sh (pid: 1658, stack limit = 0xedc20238) [ 14.216454] Stack: (0xedc21e18 to 0xedc22000) [ 14.220810] 1e00: eebd8000 edc0d000 [ 14.228980] 1e20: edc57060 edc57000 edc21e4c edc21e38 c032bc94 c032bb60 ee1e9040 ee3d2d00 [ 14.237149] 1e40: edc21e7c edc21e50 c032bd5c c032bc84 00000001 ee3b7600 ee3b7600 ee3b7600 [ 14.245319] 1e60: edc57000 00000001 edde2b00 edde2b18 edc21ebc edc21e80 bf0a4514 c032bcf0 [ 14.253488] 1e80: ee0ea180 edc57000 edc21eac edde2b00 c000f80c ee3b7600 ee0ea540 00000005 [ 14.261658] 1ea0: 00000000 00000005 ee0ea180 ee0ea18c edc21edc edc21ec0 bf0adfec bf0a42f4 [ 14.269827] 1ec0: ee0ea540 00000000 ee0ea540 edc21f78 edc21eec edc21ee0 c01cb49c bf0adefc [ 14.277997] 1ee0: edc21f04 edc21ef0 c0127d0c c01cb48c c0127cc8 00000000 edc21f3c edc21f08 [ 14.286166] 1f00: c01275a0 c0127cd4 00000000 00000000 edc21f3c edc20000 00d07610 ee0c0900 [ 14.294336] 1f20: 00000005 edc21f78 00d07610 00000000 edc21f74 edc21f40 c00c827c c0127498 [ 14.302506] 1f40: edc21fa4 edc21f50 c0026498 00000000 00000000 ee0c0900 ee0c0900 00000005 [ 14.310675] 1f60: 00d07610 00000000 edc21fa4 edc21f78 c00c8818 c00c81d0 00000000 00000000 [ 14.318844] 1f80: 00081b10 00000001 00d07610 00000004 c0008fa4 edc20000 00000000 edc21fa8 [ 14.327014] 1fa0: c0008e00 c00c87e0 00081b10 00000001 00000001 00d07610 00000005 00000000 [ 14.335183] 1fc0: 00081b10 00000001 00d07610 00000004 00d19de0 00000020 00000002 00d05008 [ 14.343352] 1fe0: 00000005 be886298 00018c98 b6f130ec 60000010 00000001 00000000 00000000 [ 14.351514] Backtrace: [ 14.353983] [] (__netdev_adjacent_dev_remove) from [] (__netdev_adjacent_dev_unlink+0x1c/0x30) [ 14.364314] r7:edc57000 r6:edc57060 r5:edc0d000 r4:eebd8000 [ 14.370022] [] (__netdev_adjacent_dev_unlink) from [] (netdev_upper_dev_unlink+0x78/0x120) [ 14.380006] r5:ee3d2d00 r4:ee1e9040 [ 14.383631] [] (netdev_upper_dev_unlink) from [] (batadv_hardif_disable_interface+0x22c/0x374 [batman_adv]) [ 14.395088] r9:edde2b18 r8:edde2b00 r7:00000001 r6:edc57000 r5:ee3b7600 r4:ee3b7600 [ 14.402914] [] (batadv_hardif_disable_interface [batman_adv]) from [] (batadv_store_mesh_iface+0xfc/0x178 [batman_adv]) [ 14.415412] r10:ee0ea18c r9:ee0ea180 r8:00000005 r7:00000000 r6:00000005 r5:ee0ea540 [ 14.423295] r4:ee3b7600 [ 14.425857] [] (batadv_store_mesh_iface [batman_adv]) from [] (kobj_attr_store+0x1c/0x28) [ 14.435755] r7:edc21f78 r6:ee0ea540 r5:00000000 r4:ee0ea540 [ 14.441468] [] (kobj_attr_store) from [] (sysfs_kf_write+0x44/0x50) [ 14.449465] [] (sysfs_kf_write) from [] (kernfs_fop_write+0x114/0x18c) [ 14.457715] r4:00000000 r3:c0127cc8 [ 14.461318] [] (kernfs_fop_write) from [] (vfs_write+0xb8/0x1d0) [ 14.469048] r10:00000000 r9:00d07610 r8:edc21f78 r7:00000005 r6:ee0c0900 r5:00d07610 [ 14.476930] r4:edc20000 [ 14.479481] [] (vfs_write) from [] (SyS_write+0x44/0x84) [ 14.484774] br-client: port 2(bat0) entered forwarding state [ 14.492165] r10:00000000 r9:00d07610 r8:00000005 r7:ee0c0900 r6:ee0c0900 r5:00000000 [ 14.500049] r4:00000000 [ 14.502601] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x38) [ 14.510158] r9:edc20000 r8:c0008fa4 r7:00000004 r6:00d07610 r5:00000001 r4:00081b10 [ 14.517960] Code: e1a01007 e1a02006 e34c004c ebf4a2c5 (e7f001f2) [ 14.524052] ---[ end trace f08a7d9e1d9c2a3b ]--- U-Boot SPL 2015.01 (Mar 18 2016 - 19:30:08) DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 U-Boot 2015.01 (Mar 18 2016 - 19:30:08) Allwinner Technology CPU: Allwinner A20 (SUN7I) I2C: ready DRAM: 1016 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment Reserved 8192kB of RAM for Framebuffer. In: serial Out: serial Err: serial SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: dwmac.1c50000 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0... Found U-Boot script /boot.scr reading /boot.scr 377 bytes read in 18 ms (19.5 KiB/s) ## Executing script at 43100000 reading uImage 1981560 bytes read in 117 ms (16.2 MiB/s) reading dtb 23549 bytes read in 30 ms (765.6 KiB/s) ## Booting kernel from Legacy Image at 42000000 ... Image Name: ARM OpenWrt Linux-3.18.27 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1981496 Bytes = 1.9 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Kernel Image ... OK Using Device Tree in place at 43000000, end 43008bfc Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.27 (julian@eclipse) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48900) ) #1 SMP PREEMPT Fri Mar 18 19:27:10 CET 2016 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: LeMaker Banana Pi [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] PERCPU: Embedded 9 pages/cpu @eefe1000 s6272 r8192 d22400 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258576 [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1025188K/1040384K available (3931K kernel code, 174K rwdata, 1132K rodata, 208K init, 610K bss, 15196K reserved, 262144K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc04f9ef4 (5064 kB) [ 0.000000] .init : 0xc04fa000 - 0xc052e000 ( 208 kB) [ 0.000000] .data : 0xc052e000 - 0xc05598f8 ( 175 kB) [ 0.000000] .bss : 0xc05598f8 - 0xc05f214c ( 611 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000023] Switching to timer-based delay loop, resolution 41ns [ 0.000357] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000514] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns [ 0.000685] Console: colour dummy device 80x30 [ 0.000721] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000738] pid_max: default: 32768 minimum: 301 [ 0.000848] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000860] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001489] CPU: Testing write buffer coherency: ok [ 0.001805] /cpus/cpu@0 missing clock-frequency property [ 0.001823] /cpus/cpu@1 missing clock-frequency property [ 0.001838] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001893] Setting up static identity map for 0x40011c40 - 0x40011c74 [ 0.060450] CPU1: Booted secondary processor [ 0.060493] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.060563] Brought up 2 CPUs [ 0.060588] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.060594] CPU: All CPU(s) started in HYP mode. [ 0.060599] CPU: Virtualization extensions available. [ 0.065075] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.065484] pinctrl core: initialized pinctrl subsystem [ 0.065886] regulator-dummy: no parameters [ 0.071994] NET: Registered protocol family 16 [ 0.072348] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.111521] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.111557] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral [ 0.111587] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.111602] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral [ 0.111818] vcc3v0: 3000 mV [ 0.112043] vcc3v3: 3300 mV [ 0.112293] vcc5v0: 5000 mV [ 0.112380] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe [ 0.112398] platform gmac-3v3: Driver reg-fixed-voltage requests probe deferral [ 0.112849] SCSI subsystem initialized [ 0.113247] usbcore: registered new interface driver usbfs [ 0.113318] usbcore: registered new interface driver hub [ 0.113433] usbcore: registered new device driver usb [ 0.113589] Linux video capture interface: v2.00 [ 0.113668] pps_core: LinuxPPS API ver. 1 registered [ 0.113676] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.113706] PTP clock support registered [ 0.114774] Switched to clocksource arch_sys_counter [ 0.121905] NET: Registered protocol family 2 [ 0.122974] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.123059] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.123181] TCP: Hash tables configured (established 8192 bind 8192) [ 0.123265] TCP: reno registered [ 0.123280] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.123339] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.123623] NET: Registered protocol family 1 [ 0.125165] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.125321] audit: initializing netlink subsys (disabled) [ 0.125405] audit: type=2000 audit(0.110:1): initialized [ 0.134298] VFS: Disk quotas dquot_6.5.2 [ 0.134558] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.136331] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.136356] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.137079] msgmni has been set to 1490 [ 0.138111] bounce: pool size: 64 pages [ 0.138136] io scheduler noop registered [ 0.138151] io scheduler deadline registered [ 0.138208] io scheduler cfq registered (default) [ 0.138525] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral [ 0.141203] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.183606] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.187333] console [ttyS0] disabled [ 0.207747] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.814490] console [ttyS0] enabled [ 0.840993] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 36, base_baud = 1500000) is a U6_16550A [ 0.872949] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 52, base_baud = 1500000) is a U6_16550A [ 0.885470] platform 1c50000.ethernet: Driver stmmaceth requests probe deferral [ 0.892897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.899467] ehci-platform: EHCI generic platform driver [ 0.904865] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 0.912159] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 0.919494] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.925722] ohci-platform: OHCI generic platform driver [ 0.931062] platform 1c14400.usb: Driver ohci-platform requests probe deferral [ 0.938376] platform 1c1c400.usb: Driver ohci-platform requests probe deferral [ 0.945755] usbcore: registered new interface driver usb-storage [ 0.952007] mousedev: PS/2 mouse device common for all mice [ 0.962268] axp20x-regulator axp20x-regulator: regulators node not found [ 0.969149] LDO1: 1300 mV [ 0.972298] LDO2: at 3000 mV [ 0.975698] LDO3: at 2275 mV [ 0.978851] LDO4: at 2800 mV [ 0.982215] LDO5: at 2800 mV [ 0.985637] DCDC2: at 1400 mV [ 0.989106] DCDC3: at 1250 mV [ 0.992241] axp20x 0-0034: AXP20X driver loaded [ 0.997829] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.006405] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.012342] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.055002] sunxi-mmc 1c0f000.mmc: base:0xf00f6000 irq:64 [ 1.062779] sunxi-ss 1c15000.crypto-engine: Die ID 0 [ 1.067830] sunxi-ss: probe of 1c15000.crypto-engine failed with error -22 [ 1.075493] TCP: cubic registered [ 1.078832] Initializing XFRM netlink socket [ 1.083141] NET: Registered protocol family 17 [ 1.087766] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.100440] Bridge firewalling registered [ 1.104463] 8021q: 802.1Q VLAN Support v1.8 [ 1.108796] Registering SWP/SWPB emulation handler [ 1.114102] registered taskstats version 1 [ 1.119083] usb1-vbus: 5000 mV [ 1.122663] usb2-vbus: 5000 mV [ 1.127319] gmac-3v3: 3300 mV [ 1.174166] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.184852] stmmaceth 1c50000.ethernet: no reset control found [ 1.191255] Ring mode enabled [ 1.194309] No HW DMA feature register supported [ 1.198870] Normal descriptors [ 1.198899] mmc0: new high speed SDHC card at address e624 [ 1.207713] TX Checksum insertion supported [ 1.213392] mmcblk0: mmc0:e624 SD08G 7.40 GiB [ 1.216616] libphy: stmmac: probed [ 1.216626] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 1.216631] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) [ 1.217010] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.217045] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.217169] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.234814] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.235016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.235024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.235029] usb usb1: Product: EHCI Host Controller [ 1.235035] usb usb1: Manufacturer: Linux 3.18.27 ehci_hcd [ 1.235040] usb usb1: SerialNumber: 1c14000.usb [ 1.235628] hub 1-0:1.0: USB hub found [ 1.235668] hub 1-0:1.0: 1 port detected [ 1.236331] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.236383] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.236487] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.254865] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.255051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.255058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.255064] usb usb2: Product: EHCI Host Controller [ 1.255069] usb usb2: Manufacturer: Linux 3.18.27 ehci_hcd [ 1.255074] usb usb2: SerialNumber: 1c1c000.usb [ 1.255627] hub 2-0:1.0: USB hub found [ 1.255662] hub 2-0:1.0: 1 port detected [ 1.256308] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.256341] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.256492] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.318952] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.318960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.318966] usb usb3: Product: Generic Platform OHCI controller [ 1.318971] usb usb3: Manufacturer: Linux 3.18.27 ohci_hcd [ 1.318976] usb usb3: SerialNumber: 1c14400.usb [ 1.319502] hub 3-0:1.0: USB hub found [ 1.319538] hub 3-0:1.0: 1 port detected [ 1.320151] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.320183] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.320303] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.378951] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.378959] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.378964] usb usb4: Product: Generic Platform OHCI controller [ 1.378970] usb usb4: Manufacturer: Linux 3.18.27 ohci_hcd [ 1.378975] usb usb4: SerialNumber: 1c1c400.usb [ 1.379522] hub 4-0:1.0: USB hub found [ 1.379559] hub 4-0:1.0: 1 port detected [ 1.379962] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.384644] vcc5v0: disabling [ 1.384652] vcc3v0: disabling [ 1.488763] mmcblk0: p1 p2 [ 1.494548] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.503485] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.516897] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null) [ 1.524433] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.531491] Freeing unused kernel memory: 208K (c04fa000 - c052e000) [ 1.640749] init: Console is alive [ 1.644465] init: - watchdog - [ 2.648475] init: - preinit - Detected bananapi // LeMaker Banana Pi [ 2.731365] random: mktemp urandom read with 4 bits of entropy available Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 5.796138] mount_root: mounting /dev/root [ 5.800858] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended [ 5.811354] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 5.837847] procd: - early - [ 5.840865] procd: - watchdog - [ 6.606054] procd: - ubus - [ 7.609696] procd: - init - Please press Enter to activate this console. [ 8.232866] NET: Registered protocol family 10 [ 8.242967] tun: Universal TUN/TAP device driver, 1.6 [ 8.248889] tun: (C) 1999-2004 Max Krasnyansky [ 8.259186] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.277084] batman_adv: B.A.T.M.A.N. advanced 2016.0 (compatibility version 15) loaded [ 8.297752] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 8.305320] sunxi-rtc 1c20d00.rtc: RTC enabled [ 8.318817] u32 classifier [ 8.321545] input device check on [ 8.325896] Actions configured [ 8.330868] Mirror/redirect action on [ 8.380954] Ebtables v2.0 registered [ 8.386278] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.400730] nf_conntrack version 0.5.0 (16021 buckets, 64084 max) [ 8.513019] xt_time: kernel timezone is -0000 [ 11.937749] RX IPC Checksum Offload disabled [ 11.952824] No MAC Management Counters available [ 11.969175] device eth0.3 entered promiscuous mode [ 11.974031] device eth0 entered promiscuous mode [ 11.982173] br-client: port 1(eth0.3) entered forwarding state [ 11.988168] br-client: port 1(eth0.3) entered forwarding state [ 12.032478] device eth0.2 entered promiscuous mode [ 12.049870] br-wan: port 1(eth0.2) entered forwarding state [ 12.055544] br-wan: port 1(eth0.2) entered forwarding state [ 12.096467] device br-client entered promiscuous mode [ 12.319653] batman_adv: bat0: Adding interface: eth0.102 [ 12.342191] batman_adv: bat0: Interface activated: eth0.102 [ 12.368829] batman_adv: bat0: Adding interface: eth0.100 [ 12.370226] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 12.408061] batman_adv: bat0: Interface activated: eth0.100 [ 12.423195] batman_adv: bat0: Adding interface: eth0.101 [ 12.427478] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 12.437005] batman_adv: bat0: Interface activated: eth0.101 [ 12.450289] 8021q: adding VLAN 0 to HW filter on device bat0 [ 12.457783] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 12.476966] device bat0 entered promiscuous mode [ 12.481729] br-client: port 2(bat0) entered forwarding state [ 12.487551] br-client: port 2(bat0) entered forwarding state [ 13.092033] batman_adv: bat0: Changing gw mode from: off to: client [ 13.098739] batman_adv: bat0: gw_sel_class: Changing from: 20 to: 15 [ 13.105651] batman_adv: bat0: hop_penalty: Changing from: 30 to: 15 [ 13.112197] batman_adv: bat0: multicast_mode: Changing from: enabled to: disabled [ 13.121181] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000 [ 13.480576] batman_adv: bat0: Adding interface: mesh-vpn [ 13.487555] batman_adv: bat0: The MTU of interface mesh-vpn is too small (1406) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which. [ 13.516518] batman_adv: bat0: Interface activated: mesh-vpn [ 13.525152] batman_adv: bat0: no_rebroadcast: Changing from: disabled to: enabled [ 13.932260] br-wan: port 1(eth0.2) entered disabled state [ 13.939085] br-client: port 1(eth0.3) entered disabled state [ 13.987370] batman_adv: bat0: Interface deactivated: eth0.100 [ 13.993137] batman_adv: bat0: Removing interface: eth0.100 [ 14.004625] batman_adv: bat0: Interface deactivated: eth0.102 [ 14.010903] batman_adv: bat0: Removing interface: eth0.102 [ 14.018061] batman_adv: bat0: Interface deactivated: eth0.101 [ 14.023825] batman_adv: bat0: Removing interface: eth0.101 [ 14.030058] tried to remove device eth0 from local-node [ 14.035444] ------------[ cut here ]------------ [ 14.040092] kernel BUG at net/core/dev.c:4981! [ 14.044542] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 14.050368] Modules linked in: iptable_nat nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 ipt_REJECT ipt_MASQUERADE ebtable_nat ebtable_filter ebtable_broute xt_time xt_tcpudp xt_state xt_quota s [ 14.147741] CPU: 1 PID: 1658 Comm: batadv.sh Not tainted 3.18.27 #1 [ 14.154004] task: ee8ab740 ti: edc20000 task.ti: edc20000 [ 14.159406] PC is at __netdev_adjacent_dev_remove+0x64/0x124 [ 14.165076] LR is at 0x0 [ 14.167609] pc : [] lr : [<00000000>] psr: 60000113 [ 14.167609] sp : edc21e18 ip : 00000000 fp : edc21e34 [ 14.179070] r10: edc57500 r9 : ee3fd800 r8 : ee3fd868 [ 14.184289] r7 : eebd8000 r6 : edc0d000 r5 : eebd8060 r4 : eebd8054 [ 14.190809] r3 : 00000000 r2 : 00000001 r1 : eefea24c r0 : 0000002b [ 14.197329] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 14.204455] Control: 10c5387d Table: 6de9806a DAC: 00000015 [ 14.210194] Process batadv.sh (pid: 1658, stack limit = 0xedc20238) [ 14.216454] Stack: (0xedc21e18 to 0xedc22000) [ 14.220810] 1e00: eebd8000 edc0d000 [ 14.228980] 1e20: edc57060 edc57000 edc21e4c edc21e38 c032bc94 c032bb60 ee1e9040 ee3d2d00 [ 14.237149] 1e40: edc21e7c edc21e50 c032bd5c c032bc84 00000001 ee3b7600 ee3b7600 ee3b7600 [ 14.245319] 1e60: edc57000 00000001 edde2b00 edde2b18 edc21ebc edc21e80 bf0a4514 c032bcf0 [ 14.253488] 1e80: ee0ea180 edc57000 edc21eac edde2b00 c000f80c ee3b7600 ee0ea540 00000005 [ 14.261658] 1ea0: 00000000 00000005 ee0ea180 ee0ea18c edc21edc edc21ec0 bf0adfec bf0a42f4 [ 14.269827] 1ec0: ee0ea540 00000000 ee0ea540 edc21f78 edc21eec edc21ee0 c01cb49c bf0adefc [ 14.277997] 1ee0: edc21f04 edc21ef0 c0127d0c c01cb48c c0127cc8 00000000 edc21f3c edc21f08 [ 14.286166] 1f00: c01275a0 c0127cd4 00000000 00000000 edc21f3c edc20000 00d07610 ee0c0900 [ 14.294336] 1f20: 00000005 edc21f78 00d07610 00000000 edc21f74 edc21f40 c00c827c c0127498 [ 14.302506] 1f40: edc21fa4 edc21f50 c0026498 00000000 00000000 ee0c0900 ee0c0900 00000005 [ 14.310675] 1f60: 00d07610 00000000 edc21fa4 edc21f78 c00c8818 c00c81d0 00000000 00000000 [ 14.318844] 1f80: 00081b10 00000001 00d07610 00000004 c0008fa4 edc20000 00000000 edc21fa8 [ 14.327014] 1fa0: c0008e00 c00c87e0 00081b10 00000001 00000001 00d07610 00000005 00000000 [ 14.335183] 1fc0: 00081b10 00000001 00d07610 00000004 00d19de0 00000020 00000002 00d05008 [ 14.343352] 1fe0: 00000005 be886298 00018c98 b6f130ec 60000010 00000001 00000000 00000000 [ 14.351514] Backtrace: [ 14.353983] [] (__netdev_adjacent_dev_remove) from [] (__netdev_adjacent_dev_unlink+0x1c/0x30) [ 14.364314] r7:edc57000 r6:edc57060 r5:edc0d000 r4:eebd8000 [ 14.370022] [] (__netdev_adjacent_dev_unlink) from [] (netdev_upper_dev_unlink+0x78/0x120) [ 14.380006] r5:ee3d2d00 r4:ee1e9040 [ 14.383631] [] (netdev_upper_dev_unlink) from [] (batadv_hardif_disable_interface+0x22c/0x374 [batman_adv]) [ 14.395088] r9:edde2b18 r8:edde2b00 r7:00000001 r6:edc57000 r5:ee3b7600 r4:ee3b7600 [ 14.402914] [] (batadv_hardif_disable_interface [batman_adv]) from [] (batadv_store_mesh_iface+0xfc/0x178 [batman_adv]) [ 14.415412] r10:ee0ea18c r9:ee0ea180 r8:00000005 r7:00000000 r6:00000005 r5:ee0ea540 [ 14.423295] r4:ee3b7600 [ 14.425857] [] (batadv_store_mesh_iface [batman_adv]) from [] (kobj_attr_store+0x1c/0x28) [ 14.435755] r7:edc21f78 r6:ee0ea540 r5:00000000 r4:ee0ea540 [ 14.441468] [] (kobj_attr_store) from [] (sysfs_kf_write+0x44/0x50) [ 14.449465] [] (sysfs_kf_write) from [] (kernfs_fop_write+0x114/0x18c) [ 14.457715] r4:00000000 r3:c0127cc8 [ 14.461318] [] (kernfs_fop_write) from [] (vfs_write+0xb8/0x1d0) [ 14.469048] r10:00000000 r9:00d07610 r8:edc21f78 r7:00000005 r6:ee0c0900 r5:00d07610 [ 14.476930] r4:edc20000 [ 14.479481] [] (vfs_write) from [] (SyS_write+0x44/0x84) [ 14.484774] br-client: port 2(bat0) entered forwarding state [ 14.492165] r10:00000000 r9:00d07610 r8:00000005 r7:ee0c0900 r6:ee0c0900 r5:00000000 [ 14.500049] r4:00000000 [ 14.502601] [] (SyS_write) from [] (ret_fast_syscall+0x0/0x38) [ 14.510158] r9:edc20000 r8:c0008fa4 r7:00000004 r6:00d07610 r5:00000001 r4:00081b10 [ 14.517960] Code: e1a01007 e1a02006 e34c004c ebf4a2c5 (e7f001f2) [ 14.524052] ---[ end trace f08a7d9e1d9c2a3b ]---